Galvanized Steel.

Flat, corrugated, trapezoidal and painted galvanized steel — from stock.

All Thermal Insulation Waterproofing Roofing Roof & Facade Covers Aluminium Sandwich Panels Galvanized Steel Building Materials

Galvanized

Painted Slit Coil

This is the slit form of coil-produced materials, slit on the slitting line according to customer request. On our slitting lines, slitting down to a width of 20 mm can be performed. Packaging can be done upright or flat according to customer requests. The slitting thickness range is 0.20-2.50 mm.

Detail

Galvanized

Painted Coil

Painting can be applied over cold-rolled, galvanized or aluzinc substrates. Grades: DX51, DX52, DX53, DX54, S250, S280, S320, S350 Thicknesses between 0.15 and 1.50 mm Inner diameter: 508 mm All RAL colors and other special colors you require Coil weights of your choice

Detail

Galvanized

Painted Trapezoidal Sheet

Sheet Thickness: 0.50 – 1 mm Painted Galvanized Steel Sheet. Sheet Length: Min. 1000 mm, max 12000 mm Sheet Effective Coverage Width: 800 mm – 1000 mm (Tolerance ±3 mm) Application Area: Roof – Facade Cladding. Profile Number

Detail

Galvanized

Galvanized Flat Sheet

Sheets are produced from steel zinc-coated between 122 gr/m2 and 350 gr/m2, with a thickness of 0.27 mm – 2.00 mm and a width of 550 mm-1300 mm, in a standard length of 2000 mm and up to 6500 mm in the desired lengths and within tolerances. Sheet Thickness: min. 0.30, max. 3.00 mm. Sheet Width

Detail

Galvanized

Galvanized Corrugated Sheet

It is obtained by passing flat galvanized sheets with a thickness of 0.30 mm – 1.00 mm through forming rollers. The corrugating process is carried out in accordance with TS 822 and certain international standards. In corrugated galvanized sheets, the width is 1000 mm before corrugating and 875 mm after corrugating, and it is produced in the desired lengths up to 10,000 mm

Detail

Galvanized